Part No. 602885-49U, 4032-300 Velocity Transducer

Specifications

Measurement Mode

Velocity

Bearing Type

Anti-Friction Sleeve with Shaft Rider

Applications

The 4032 Velocity Transducer is a direct replacement for the discontinued 4028 velocity transducer. It is a high quality transducer used for general purpose machine vibration measurement. It is a self-powered device, capable of being used with cable runs of up to 1000 ft.

Dynamic

Output

225 mV Peak ±3% for 1.0 in/sec Peak into a 10K ohm Resistive Load at 100 Hz

Linearity

±2 (From 0.2 to 8.0 in/sec Peak)
±3 (From 0.1 to 10.0 in/sec Peak)

Frequency Response

20 to 1500 Hz, ±5%

Transverse Axis Sensitivity

5% at 100 Hz

Natural Frequency

20 Hz (Approximate)

Temperature Sensitivity (Change in output from 20 to 1000 Hz)

±5% (with a temperature range of 25-300°F)

Amplitude Range (Inches)

0.0002 (Minimum)
0.100 (Maximum)

Operating Gs, Maximum
17

Damping

Electro-Magnetic

Electrical

Power Requirements

None, Self Generating

Sensing Element Impedance

7500 ohm, ±5% at 75°F

Grounding, Sensing Element

Internally ungrounded

Connections (Connector)

  • Pin A- Signal
  • Pin B- Open
  • Pin C- Signal Return

Environmental

Temperature Range

-20 to 300 ºF

Operating Position (Degrees from Vertical, Connector Up)

±110

Physical

Vitec Part No.

602885-49U

Case Material

2024-T3 Aluminum with Satin Anodized Finish

Height (Inches)

4.92

Body Diameter (Inches)

1.97

Center Mounting Hole

1/4-28 UNF x 1/4 in Deep

Mating Cable Assembly

Varies with application, contact factory

Weight (Oz)

28