Vibration Transmitters

Monitor vibration with your PLC or computer, up to 15 miles away

The Vibration Transmitter is designed for use where continuous vibration monitoring of rotating equipment is required, but trending, alarm or trip functions will be performed by a Programmable Logic Controller, computer or data logger. Mounted directly to your rotating equipment, it generates a 4 to 20 mA DC signal proportional to the velocity of the machine vibration, transmitted over a simple 2-wire current loop. This allows long cable runs, up to 15 miles, for applications from remote pumping stations on pipelines to large facilities like refineries, steel mills and paper mills.

The Vibration Transmitter is operational to 185F. It has a stainless steel case that is compatible with wet, corrosive and explosive* environments, and is available in four full scale ranges: 0-1, 0-2, 0-3 and 0-5 in/sec, with several types of optional mounting adapters.

*CSA, Atex, CE Listed, approved for:
Class I, Div. 1 & 2, Groups A, B, C & D
Class II, Div. 1 & 2, Groups E, F & G
Class III, Div. 1 & 2
T3C Ta = 85C Max

CE 0518 II 2 G
LCIE 03 Atex 6034X, 6035X
Ex d IIC T3
Ex nA IIC T3
-40C ≤ Ta ≤85C

Part No.Full Scale Range
53290-00 0 – 1.0 in/sec
53290-01 0 – 2.0 in/sec
53290-05 0 – 3.0 in/sec
53290-06 0 – 5.0 in/sec

Accessory

Part No. 412766-114A, Conduit Elbow and Cap

Vibrations-Transmitter-Photos0001